Tap Replacement in Grange
A new tap changes more than the look of a basin. Tap replacement in Grange means matching the fitting to the sink holes, the mounting style and the pipework underneath before anyone picks up a spanner. Grange Plumbing Services sends a licensed plumber, and you get a fixed quote before any work starts.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Most homes here are owned rather than rented, the last census shows, so a new mixer is usually a chosen upgrade rather than a stopgap. We fit new taps across Grange and the streets around it, from kitchen mixers to laundry sets.
What Decides the Right Replacement Tap
A mixer blends the hot and cold streams inside one body and delivers them through a single spout; the older style gives each supply its own outlet. The style choice sets the pattern for everything else.
The replacement has to suit the count and spacing of the holes drilled in your sink or basin. The mounting matters too: deck or wall, plus what joins it to the supplies beneath.
A wall-mounted model draws water from pipework inside the wall, so switching between wall and deck mounting changes the wall or the basin as well as the tap.
An isolation valve on each supply line shuts the water to one fitting without closing down the whole house. Where the old setup has none, we add them, so the next visit is short.
On Grange Road and streets of the same era, the original supply lines are galvanised steel, and rust at the threaded joints can leave a connection the new tap will not seat onto cleanly. We check the line before the old fitting comes off, and our tap and toilet plumbing overview shows where each job sits.
A tap that needs nothing but a washer is a smaller visit, and our tap repairs guide steps through that call. The tap out at the back wall is a separate job: see outdoor tap repairs.
Which Rental Taps Meet the Flow Limit
Queensland's water charging rules let an owner bill a tenant for all water used only when the cold taps inside the house and the single mixers run at 9 litres per minute or under. Meet the test and the full water bill can move to the tenant.
The rule covers the cold taps and mixers over a hand basin, a kitchen sink or a laundry trough. Bath taps, garden taps and the taps feeding a washing machine or dishwasher are exempt.
At the last census 47.8 per cent of dwellings here had four or more bedrooms, so a rental often has several wet areas and a long list of fittings to test. The Residential Tenancies Authority suggests owners keep proof: plumbing reports, receipts, packaging, warranties or instruction manuals.
Certification Rules for Replacement Taps
WaterMark certification is the proof that a plumbing product is safe and fit for purpose under Australia's Plumbing Code. WELS registration gives a tap its stars and its water use figure. A tap needs both before a licensed plumber can fit it legally.
Buying online? The listing has to display the WaterMark trademark, the product spec and licence number, plus the WELS registration details, the stars and the flow figure. Both product databases search by model name, and a seller can fill any gaps if you ask.
Business Queensland sets 3 stars as the floor for tap fittings and showerheads, and states the rule does not reach renovations. We confirm the paperwork on every tap we fit, so nothing stalls at installation.
Do You Need a Licensed Plumber to Fit a Tap
Yes: Queensland law puts tap fitting with the licensed trades, and the QBCC uses this very job as its example of work an owner cannot do. The one tap job left open is changing a washer or a jumper valve, which anyone with the right know-how may do, though the result still has to comply.
A like-for-like swap counts as minor work, carried out by a QBCC licensee, and nothing gets lodged. A new tap, or one shifted to a different spot, is notifiable work. No council permit applies, but we lodge a Form 4 with the QBCC inside 10 business days of finishing.
Where the building's drain is combined, or the water supply is dual reticulated, the job becomes permit work and the plumber applies to the local government first.
Tenancy law asks a tenant for written approval, on a Form 23, before attaching a fixture. A tap fitted without consent leaves the owner three paths. The owner can call it a breach and work through the dispute, keep the change, or take the fitting out and bill the tenant for the removal.
What Changes the Price of a Tap Replacement
The price turns on the tap type, the state of the isolation valves and connections, the hole pattern in the basin, and access underneath. A vanity squeezed into an Evelyn Street character build gives less working room than an open laundry.
A new or relocated tap adds a lodgement fee for the Form 4. We pay it when we lodge, and the cost can be passed to the owner.
Whatever the scope, the fixed quote settles the figure before work begins.
How a Tap Replacement Visit Runs
- 1
Get in touch
Call (07) 3523 7172 or send a quick message about the job in Grange, and we'll ask what we need to know.
- 2
Match the tap to the holes
Your plumber checks the hole spacing, the mounting and the supply connections under the basin, then confirms the new tap suits all of it before the old one comes off.
- 3
Sign off the quote
You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.
- 4
Pay once it's done
Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.
Plumbing job in Grange?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions Answered
Call (07) 3523 7172What do the WaterMark and WELS labels on a tap actually mean?
WaterMark certification shows a tap complies with Australia's Plumbing Code. WELS, the Water Efficiency Labelling and Standards scheme, registers a tap's star rating and water use. A licensed plumber can only install a tap carrying both.
Can I supply my own tap for a plumber to install?
Yes, provided the tap carries the WaterMark trademark and a WELS star rating, since that certification is what makes the install legal for a licensed plumber. Ask the seller for anything the listing leaves out before you pay.
Will a tap swap in Grange need a permit or Form 4?
No permit for a like-for-like swap: that is minor work and nothing gets lodged. Adding a tap or moving one is notifiable work, still without a council permit, closing with a Form 4. A shared drain or a dual reticulated supply at the building can instead call for a permit.
What flow limit applies to rental taps in Grange?
Queensland's water charging rules require internal cold water taps and single mixers to run at 9 litres per minute or under before an owner can bill a tenant for all water used. It applies to basin, sink and trough taps only. Bath, garden and appliance taps sit outside it.
Is there a minimum star rating for taps in Queensland?
Yes, in part: every tap sold in Australia needs WELS registration with its stars on display. The 3-star minimum Business Queensland sets for tap fittings is a building rule, and the same page says it does not extend to renovations.
Call Us About Your New TapsWe'll call you back.
Call (07) 3523 7172 to book a plumber in Grange. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.
To claim your $0 call-out fee, call (07) 3523 7172 today.